Disposable Medical Device Manufacturing – Consultants

Disposable Medical device manufacturing or single-use medical devices are medical devices or any medical apparatus or instrument which has the capacity of being used only for once or which has one time use. Disposable devices are used in hospital or healthcare sectors and then after used is been disposed of. The FDA defines that this device is entitled by the manufacturer and the intended use for this medical device is for one single patient and one procedure only. This means that the device is not reusable and has a short lifespan and it is only limited to one patient.

There are numerous types of single-use medical devices, ranging from external, such as plastic gumboots, gloves and bandages merely used to assist a patient to more complex and internal devices, consisting of sharp blades, needles and tubes. Both these devices are Disposable or Single used, because of some reasons, but most importantly when it came in contact with radioactivity, blood infection and disease or the human tissues and must, therefore, be Disposed or terminated.

We provide regulatory consulting for medical devices manufacturing 

Each country has its own strict rules and regulations regarding Disposable medical devices and the reprocessing of medical devices in hospitals and clinics. The only reason for creating Disposable medical devices is for infection control. When a medical device is used only once it cannot pass any infectious disease to or any infectious agents to subsequent patients. One might think the most important factor in the design of Disposable medical devices manufacturing needs to be careful and balanced between performance, cost, reliability, materials and shelf life.

Disposable medical device manufacturing mainly depends mainly on injection moulding plastics which is assembled by bonding, glueing, and ultrasonic welding or radio frequency welding. The high producing volume of disposable medical devices calls for an automated assembly in clean rooms to avoid human contact. Unlike Reusable device which is frequently sterilized at the healthcare facility, disposable devices are sterilized before leaving the manufacturing site. The medical device design and packaging must be accommodating the sterilization.

The reusing or the reprocessing of medical devices labelled as disposable medical devices have been standard practice in U.S. hospitals for years because it makes it less expensive and also reduces the material waste. But before the medical devices are being reprocessed or reused theirs a third party or a hospital reprocesses should comply with the same requirements that apply to the original equipment manufacturers according to the US.FDA regulations.

Read More - Disposable Medical device manufacturing 

Contact details –

Phone  no -  93702 83428

Mail id – enquiry@operonstrategist.com

If  You Want Medical Devices Services Consultation For Following.

1. Medical Device Consulting 
2. cdsco registration 
3. FDA 510k Clearance 
4. ce mark medical device 
5. CDSCO Manufacturing License 
6. CDSCO import license 
7. TURNKEY PROJECT CONSULTANT 
8. medical device manufacturing 
9. iso 15378 certification 
10. 21 cfr part 210 and 211 
11. ISO 13485 Medical Device Consultant 
12. Primary Packaging Turnkey Project Consultant 
13. Clean Room Design Consultant 
14. manufacturing site conceptualization 
15. Market Analysis and feasibility for Medical Devices 
16. manufacturing plant layout design 
17. medical device design and development 
18. DMF file submission guideline 
19. 21 cfr part 820 
20. qms certification services 
21. capa management 
22. design control requirements 
23. medical device process validation 
24. combination product 
25. continuous improvement program 
26. Medical Device Compliance & Regulatory Services 
27. Cdsco India authorized agent for medical device